THE PROCESS. 

 MY SHOP IS OFTEN A WRECK AS I GET "ON THE HUNT" ON A PARTICULAR PROJECT. EVEN WORSE WHEN THERE ARE SEVERAL PROJECTS GOING AT ONCE...LIKE ALL THE TIME.

 The Brother Bike lower triple tree clamp with a badly misaligned stem from a bad shortening job and bent fork stops. The steering lock and bump as well as a boss to mount a brake sensor were removed, filled and smoothed.

The Brother Bike lower triple tree clamp with a badly misaligned stem from a bad shortening job and bent fork stops. The steering lock and bump as well as a boss to mount a brake sensor were removed, filled and smoothed.

 The Brother Bike steering stem after it was pressed together with a machined inner sleeve that was then welded. The white on the bottom portion is frost from sitting in the freezer to get the sleeve to contract. The upper portion has been heated.

The Brother Bike steering stem after it was pressed together with a machined inner sleeve that was then welded. The white on the bottom portion is frost from sitting in the freezer to get the sleeve to contract. The upper portion has been heated.

IMG_8848.JPG
 The Brother Bike steering stem welds were thin and non-existent in some places. Amazing it was holding together.

The Brother Bike steering stem welds were thin and non-existent in some places. Amazing it was holding together.

IMG_9748.JPG
IMG_8137.JPG
IMG_0005.JPG
IMG_8163.JPG
IMG_8043.JPG
IMG_8830.JPG
IMG_6660.JPG
IMG_7846.JPG
IMG_9065.JPG

THE ELVI


TeCH DAY


OTHER PEOPLES STUFF

(custom gallery)

CRAZY


CATS